GLOSSARY & TECHNICAL
The terms, without the jargon.
What DID, channel, IVR and CDR mean, and what it takes technically for a call to sound clear. For anyone who wants to know what they’re buying.

The words you’ll hear
- VoIP
- Voice over IP. The call travels as data, not over a copper wire.
- SIP
- The protocol phones, apps and phone systems use to set up a call. A “SIP device” is anything that speaks SIP: a desk phone, an app, a phone system.
- DID number
- A phone number (e.g. 210 41x xxxx) that can be dialled directly from outside and is routed to a device, extension or queue.
- Channel
- One call happening at the same moment. 4 channels = 4 simultaneous calls, inbound or outbound. Not the same as the number of people.
- Extension
- Each colleague’s internal number in the phone system (e.g. 101). It can ring on a desk phone, mobile and computer at once.
- IVR
- The automated “press 1 for sales, 2 for support” menu. It sends callers to the right place without anyone transferring them.
- Call queue
- When everyone is busy, the call waits (with music or a message) and goes to the first person who’s free — instead of a busy tone.
- CDR
- Call Detail Record: the detailed log of each call — who, where, when, how long, what it cost. You can see your CDRs in your account.
- SIP trunk
- The “line” that connects an IP phone system to the provider’s network over the internet. It replaces ISDN or analogue lines.
- PBX
- A phone system. A “cloud PBX” runs in the cloud instead of as a box in the office — e.g. 3CX or Yeastar, both of which we offer.
- Number porting
- Moving the number you already have from another provider to the CloudOn network. The number stays the same.
- ATA
- A small adapter that makes an old analogue phone or fax work as a SIP device.
- Softphone
- An app that turns your computer or mobile into a SIP phone (e.g. Zoiper, MicroSIP, Linphone). See the recommended ones under “How it works”.
- QoS
- A router setting that gives voice priority over other traffic (downloads, video), so calls don’t break up.
- Codec
- How the voice is compressed. G.711 gives landline quality; G.729 needs less bandwidth.
What a clear call needs
General rules of IP telephony. For your own setup, we’ll help.
How much internet do I need?
Allow roughly 100 kbps per simultaneous call, in each direction. So 4 calls at once need about 0.4 Mbps up and down — any modern connection covers that easily. Stability matters more than speed.
What should I set on the router?
Two things: QoS that prioritises voice, and turning off “SIP ALG”, a feature on many routers that often breaks calls (one-way audio, calls dropping after 30 seconds). We’ll help you do it.
What if the internet goes down?
Office phones won’t be able to make calls. So: with a second connection (e.g. a 4G/5G router) telephony keeps going; with Cloud PBX you can send calls to a mobile or voicemail; and the mobile app works on mobile data.
Delay and echo
For a clear call, latency (ping) to the network should stay under 150 ms and be steady. If you hear echo or clipped words, the usual culprit is Wi-Fi or a congested connection — try a cable.
Phones and power
SIP desk phones are powered either by their own adapter or over the network cable (PoE), if your switch supports it. With PoE and a UPS on the switch, phones survive short power cuts too.
Security
Your SIP device passwords are the key to your account: anyone who has them can make calls on your balance. Don’t send them by email, and if you suspect anything, change them straight away in your account (SIP devices and passwords).